Elta 2402N Instruction Manual page 19

Notes:
- Delete the programmed tracks by changing the mode or setting FUNCTION (11) to the OFF position.
- Press (6) or (7) at the device or SKIP - (2) or SKIP + (5) on the remote control to skip to the
previous or next track in the programmed order.
- By pressing repeatedly PROGAM (3) at the device or on the remote control the programmed order can
be verified.
- If within 30 seconds during the programming operation no button is pressed, the program-mode will be
exited.
Repeat modes
There are three repeat modes, which can be invoked and switched over with REPEAT (4) at the device or on
the remote control (6) during the playback mode.
Each key stroke changes the repeat mode as follows:
1. Press once REPEAT (4) at the device or on the remote
control (6) during the playback mode to repeat the current
track continually. The repeat indication (dot "." between the
two digits) on the display flashes.
2. Press twice REPEAT (4) at the device or on the remote
control (6) during the playback mode to repeat all tracks
on the current disc in their recorded sequence. The repeat
indication (dot "." between the two digits) lights up permanent.
3. Press again REPEAT (4) at the device or on the remote control
(6) to return to the normal play mode. The display shows the
standard indication.
Handling And Cleaning Of Discs
HANDLING OF CD's
* Remove the CD from its cover.
* Do not touch on the surfaces.
* Do not attach stickers on CD's and do not write on them.
* Do not bend CD's.
Storage
* Always store CD's in their cover.
* Do not subject to direct sunlight, high temperatures, humidity or dust.
Cleaning CD's
* Clean CD's with a soft cloth.
* Clean CD's from the centre to the edge.
NORMAL
REPEAT 1 REPEAT ALL
PLAYBACK
19.