Advertisement
questions
Why won't my TV switch
on?
Why doesn't my remote
control handset work?
problem identification
snowy picture - poor sound
multiple images - sound O.K
intermittent interference
no picture or sound
If a problem still continues after referring to this guide contact your dealer immediately.
Under NO circumstances remove the rear cover of your plasma screen or the
Check that the plasma screen and the AVC unit are connected
together correctly. Check that both plugs are connected to the socket
and switched on, check fuse and make sure TV is not in standby
Make sure there are no obstructions between the handset and the
TV's infra-red lens, or the batteries may be exhausted - replace the
possible reason
Connection of aerial lead
to the TV is poor.
Corroded or poor aerial
connections.
Aerial has moved position.
Adverse weather conditions.
Transmitter problems.
Aerial has moved position.
TV not tuned correctly.
Adverse weather conditions.
Transmitter problems.
AV Input not set correctly.
Interference from
electrical or mechanical
motors, fluorescent lights,
portable radios etc.
TV may be in AV
mode.
Picture/sound
controls set to
minimum.
TV in standby or
power save
mode.
casing of your Audio Visual Control (AVC) unit.
answers
mode (see below).
whole set of batteries.
remedy
Make new connection
and/or change aerial plug.
Make new connections
Check with local Operator.
Re-tune or fine tune TV.
Check with local Operator.
Check what external
equipment is connected
and check its scart AV
Check devices for shielding
and renew if necessary or
move further from TV.
or renew lead.
Re-align aerial.
None.
Re-align aerial.
None.
status.
Press the AV button
or
to
buttons on your
handset to return to
normal TV mode.
Check
picture/sound
controls (go to
MAIN MENU).
Press one of the
buttons
to
.
41
Advertisement
