Download Print this page
Hide thumbs Also See for RT-2VSE:

Advertisement

Quick Links

PARTS & SERVICE MANUAL
for
RT-2VSE & RT-2VSHO
TOASTER
Model RT-2VSE
The information found in this manual will prove very helpful. Although the instructions are easy to
follow, all repair procedures should be carried out by a qualified Merco Savory Certified Service
Representative.
THIS MANUAL SHOULD BE RETAINED FOR FUTURE USE
RT2VSEsvcmanual
REV: 7/13/07

Advertisement

loading
Need help?

Need help?

Do you have a question about the RT-2VSE and is the answer not in the manual?

Questions and answers

Summary of Contents for Savory RT-2VSE

  • Page 1 Model RT-2VSE The information found in this manual will prove very helpful. Although the instructions are easy to follow, all repair procedures should be carried out by a qualified Merco Savory Certified Service Representative. THIS MANUAL SHOULD BE RETAINED FOR FUTURE USE...
  • Page 2: Parts Replacement

    PARTS REPLACEMENT (For models: RT-2VSE & RT2-VSHO) WARNING: Disconnect unit from power source before attempting any service. A – CASE REMOVAL E – INFINITE CONTROL SWITCH 1. Remove reflector tray, toast pan and delivery 1. With control panel removed, remove the infinite chute.
  • Page 3 H – GEAR MOTOR J – DRIVE (MOTOR) SPROCKET 1. With outer case removed, disconnect motor 1. With outer case removed and drive chain leads from on/off switch and terminal block and removed, loosen the set screw on sprocket with a cut wire ties at floor panel.
  • Page 4 L – CONVEYOR CHAIN Figure 8 1. With outer case removed, loosen motor 7. Push back on rear shaft assembly until excess mounting bracket retaining bolts on underside of slack is removed from chain. Holding tension, unit and slide motor to the left. tighten both the rear shaft adjusting brackets 2.
  • Page 5 M – FRONT & REAR SHAFT BEARINGS Figure 8 1. Remove outer case and conveyor chain. 2. To remove front shaft bearings: first, remove the bearing retainers on both sides of the unit. 3. With retainers removed, slide bearing out (with shaft, if necessary).
  • Page 6 PROBLEM POSSIBLE CAUSES SUGGESTED REMEDIES 1. Check voltage at receptacle. Check that 1. Defective or improper electrical voltage conforms to Savory specifications outlet. on unit data plate. No heat, conveyor belt 2. Check plug and line cord. Replace if doesn’t run 2.
  • Page 7 PROBLEM POSSIBLE CAUSES SUGGESTED REMEDIES Cannot regulate speed of 1. Defective speed control 1. Replace speed control conveyor belt 1. Loose sprocket(s) 1. Tighten sprocket(s) Gear motor runs but 2. Broken drive chain 2. Replace drive chain conveyor belt slips or doesn’t run 3.
  • Page 8 RT-2VSE SCHEMATIC RT-2VSHO SCHEMATIC RT-2VSE/VSHO Service Manual...
  • Page 9 This page intentionally left blank. RT-2VSE/VSHO Service Manual...
  • Page 10: Parts List

    PARTS LIST RT-2VSE (208/240V) LETTER PART # DESCRIPTION 12542 Reflector Tray 18026 Element – 300W 104V, Upper (208V) 18027 Element – 300W 110V, Upper (220V) 18028 Element – 300W 120V, Upper (240V) 18039 Element – 335W 104V, Lower (208V) 18040 Element –...
  • Page 11: Exploded View

    EXPLODED VIEW RT-2VSE/VSHO Service Manual...
  • Page 12 Merco Savory, LLC 1111 North Hadley Road Fort Wayne, Indiana 46804 United States of America Telephone: (260) 459-8200 Facsimile: (260) 436-0735 Service Hotline: (800) 678-9511 www.mercosavory.com RT-2VSE/VSHO Service Manual...

This manual is also suitable for:

Rt-2vshoRt-2vsho