Related Manuals for Little Wonder Shredding TruckLoader 8160
Summary of Contents for Little Wonder Shredding TruckLoader 8160
- Page 1 LITTLE WONDER Shredding ® Model 8160 © 2003 Little Wonder, Schiller Grounds Care, Inc. All Rights Reserved.
-
Page 2: Table Of Contents
Important Information Important Information A. Introduction Introduction .............. 1 On behalf of everyone at Little Wonder, we would like to thank you for your purchase of a Little Service Information ..........1 Wonder Shredding TruckLoader. This professional Special Safety Information ........1... -
Page 3: Packaging
Packaging PACKAGE LID DISCHARGE CHUTE NOZZLE ASSEMBLY PARTS BOX: (2) HOSE BANDS (720333.17) (2) HOSE CLAMPS (720105) (1) HOSE FLANGE ASSEMBLY (720101.17) (1) FLANGE CLAMP PLATE (720253.10) (1) LITERATURE PACKAGE (1) WARRANTY CARD (1) HARDWARE BAG (720531): (1) 910131 - KNOB, MALE THREAD 5/16-18, Red BOOM (2) 38524 - KNOB, FEMALE THREAD 3/8-16, Black (4) 64229-03- LOCK NUT, 3/8-16... - Page 4 Safety and Warnings Start Stop Caution: Hot Surface Faster WARNING Slower Caution: Thrown objects. Keep bystanders away. WARNING WARNING P/NO. 720609 720600 P/NO.720600 P/No 910609 720603 P/NO. 720603 max. 3 700 min Month/Year Item # XXXX-XX-XX SERIAL No. LABEL 720602 P/NO.
-
Page 5: General Safety Rules
Do not defeat interlock system; it is for your protection. Don’t attempt to repair Shredding TruckLoader. Have repairs made by qualified Little Wonder dealer 8. Do not allow children to operate machine. or repairman. See that only Little Wonder and 9. -
Page 6: Engine/ Fuel Warnings - "Don'ts
Warnings - “Do’s” Con’t Don’t run engine when electrical system causes spark outside the cylinder. During periodical checks Always store Shredding TruckLoader indoors. When of the spark plug, keep plug a safe distance from not in use, store Shredding TruckLoader indoors in a cylinder to avoid burning of evaporated fuel from sheltered area (a dry place) where it’s not accessible to cylinder. -
Page 7: Assembly Instructions
Assembly Instructions This unit is designed for vacuuming leaves, grass 3. Direct discharge into receiver box of the transport clippings, other organic materials, and quickly loading vehicle, and affix it with two knobs (38524), two nylon them from the ground into a truck. insert nuts (64229-03) and washers (64163-31) as shown below. -
Page 8: Attach Boom To The Frame And Connect It To The Hose
F Hose Assembly 2. The flange will activate the safety switch assy (720232) that will allow you to operate the unit. 1. Remove hose from the box and stretch it. 3. When hose is disconnected you can use the flapper 2. -
Page 9: Use Of Lifting Lug
PEOPLE OR THEIR PROPERTY. SUSPENDED FROM THE LIFTING LUG. A. Starting the Engine H. Liner Exchange Little Wonder Shredding TruckLoader is equipped with a replaceable liner in two sections (#720215 and #720216). WARNING DANGER In order to replace the liner you will need the following FUEL IS EXTREMELY FLAMMABLE. -
Page 10: Removing Clog In Hose
Manually clear the clog WARNING DANGER E. Stopping the Engine KEEP RECOIL STARTER SCREEN AND ENTIRE ENGINE CLEAR OF ALL DEBRIS. DO NOT 1. Move throttle to “slow”. OPERATE ENGINE WITH AN ACCUMULATION OF 2. Push rocker switch to “off”. GRASS, DIRT, LEAVES OR OTHER 3. -
Page 11: Storage And Maintenance
Storage and Maintenance A. Storage 1. When not in use store Shredding TruckLoader, in sheltered area (a dry place) not accessible to children. Keep throttle in the “Slow” position and switch “OFF”. 2. The Shredding TruckLoader, as well as fuel, should not be stored in a house or poorly ventilated areas. -
Page 12: Removing The Fan
Insert a 3/4-16 x 5” long grade 5 (or better) bolt and jack or push the fan off the engine (Little Wonder P/no 910505 pressure screw is recommended.) 8. Replace damages or worn fan with a new one. -
Page 13: Shredding Truckloader Bolt/Nut Torque Specification
D. Shredding TruckLoader bolt/nut Torque specification Location Bolt/ Nut Size Part No. Item # Min torque Max torque (Exploded View) Ft-Lbs (in-lbs) Ft-Lbs (in-lbs) Housing to engine face - 24 x 910503 22 (264) 28 (336) flange head, Grade 5 Housing to engine - 18 flange nut 64141-6... -
Page 14: Housing Assembly Part Numbers
Part Numbers A. Housing Assembly Part No. Description Qty. Part No. Description Qty. 720315.7 Tube Square Boom 720201.10 Housing Assy 16HP 720322 Chain Loop Assy (3/8-16 Thread) 720211.10 Front Plate Assy 720105 Clamp for Hose 720234.17 Hose Flange Assy 720106 Hose 10”... - Page 16 TWO YEARS from date of purchase, when used for RESIDENTIAL SERVICE, or COMMERCIAL SERVICE. Any LittLe Wonder Shredding TruckLoader or part found to be defective within the warranty period is to be returned to any registered LittLe Wonder Dealer.