Epson Progression Product Support Bulletin page 16

Several files will now be copied onto your hard drive. You will be instructed to start
AutoCAD with the "ACAD -r" command, but this is incorrect; use "ACADR12 -r" or
AutoCAD will not be able to find certain files.
AutoCAD will now display some information about your current configuration, and
prompt you to Press RETURN to continue. Press <ENTER> now. The configuration
menu is now displayed. Select 3 to configure your video display.
Of the available video displays listed, select 11, TurboDLD Lite by Panacea Inc.
A welcome screen will be displayed followed by the "TurboDLD Lite Main Menu".
Highlight Select Graphics Board/Resolution from this menu and press <ENTER>.
The "Graphics Board Selection Menu" should now be displayed. Highlight Select
Display Graphics Board and press <ENTER>.
The "Select Graphics Board" menu should now be displayed. Highlight either
Wingine VGA or Wingine by Chips and Technology and press <ENTER>.
Wingine VGA supports the following resolutions:
640 by 480 by 16 colors
800 by 600 by 16 colors
1024 by 768 by 16 colors
320 by 200 by 256 colors
640 by 400 by 256 colors
640 by 480 by 256 colors
800 by 600 by 256 colors
Wingine by Chips and Technology supports the following resolutions:
640 by 480 by 256 colors
800 by 600 by 256 colors
1024 by 768 by 256 colors
1280 by 1024 by 256 colors (currently not supported by EPSON)
These resolutions will be displayed in an upcoming screen.
You will now be returned to the "Graphics Board Selection Menu". Highlight Select
Display Resolution and press <ENTER>.
You will now be able to highlight and select the desired resolution from those
displayed above.
Finally, select Save and Exit from the main menu. AutoCAD will now ask you
several questions before returning to the Configuration menu; choose the defaults.
PSB No: S-0156
Page: 2 of 2