Starting The Service Program - Epson Stylus PHoto 875DC Service Manual

EPSON Stylus PHOTO 875DC

5.2.1.3 Starting the Service Program

!
Make sure any ports other than selected for this program
are not used for other Stylus PHOTO 875DCs.
!
Be careful not to connect four or more printers to the
printer ports at a time. The fourth or later printers (ports
device EPUSB4 or later) can not be adjusted by this
service program. Once a printer is recognized as the
fourth or later printer, it will not be adjusted. If it happens,
delete that printer's port through Control Panel / System /
Device Manager/EPSON Printer Manager.
1. Start the service program. The start-up window appears. In the
window, select the model name and the port used for the printer to be
adjusted, and click OK.
Figure 5-1. Start-up Window
2. The main menu window appears.
ADJUSTMENT Adjustment
Figure 5-2. Main Menu
Revision A
40