Adjustment - Epson Stylus Photo 750 Service Manual

EPSON Stylus Photo 750
4.2.5.3 Motor, Assembly, CR Removal
1. Remove the upper housing.(See "Housing Removal" on page -54)
2. Rotate "Gear, 67.2" toward the front of the printer and disengage the
"Carriage Lock Mechanism". Then, move the carriage to the center
of the platen.
3. Push "Holder, Pulley, Driven" to loosen the timing belt and detach
the timing belt from the pulley of the CR motor.
Figure 4-12. Timing Belt Removal
4. Remove 2 screws securing the motor, and remove "Motor,
Assembly, CR".
When installing "Motor, Assembly, CR", be sure that
2 projections of the motor bracket are inserted to the
holes of the frame.
Disassembly and Assembly
Figure 4-13. Motor, Assembly, CR Removal
After replacing "Motor, Assembly, CR", perform
Bi-D adjustment. (See "Bi-D Adjustment" on
page -86)
Disassembly
Revision A
63