Overview; Adjustments - Epson Stylus Photo 1200 Service Manual

EPSON Stylus Photo 1200

5.1 Overview

This section will explain required adjustment procedures for this printer
after disassembling or replacing parts.

5.1.1 Adjustments

Since the basic components and function of this printer is same as
those of Stylus Photo 750, both printers share the same adjustment
items. Therefore, adjustment items only for Stylus Photo 1200 are
explained here.
Table 5-1. Required Adjustments
Priority order 1
Procedure/ Paper Gap
Replacing parts Adjustment
Printer
Mechanism --
Exchange
Control Board
--
Exchange
Print Head
--
Exchange
CR Motor
---
Exchange
Carriage
Assembly
O
Removal/
Exchange
Roller Assembly/
O
Removal/Exchage
NOTE: 1. "O" means adjustment is required. "---" means adjustment
is not required.
Adjustment
2 3 4
Ink Head
Head ID
initial Angular
Writing
charge Adjustment
O O ---
O O O
O O O
--- --- ---
--- --- O
--- --- ---
NOTE: 2.Initial ink charge should be done after installing the new ink
cartridge.
5
Bi-D
Adjustment
O
O
---
O
O
---
Overview
Figure 5-1. Flow Chart
Revision A
20