Epson Stylus Color 600 Service Manual page 77

Chapter 3 Disassembly and Assembly
Figure 3-4. Circuit Boards Removal
REQUIRED ADJUSTMENT
Be sure to perform the following adjustments when the C200 MAIN board is replaced:
1) VH Voltage value writing (Refer to Chapter 4 / Section 4.2.2.3.)
2) Printhead Angle Adjustment (Refer to Chapter 4 / Section 4.2.2.4.)
3) Bi-D Alignment Adjustment (Refer to Chapter 4 / Section 4.2.2.5.)
3-7
Rev. A