EOS Core System Quick Start Manual

Setting Up Your Eos System

1. Connect the power adapter

cord to the Base Station

(jack marked "DC15V")

3. Select the correct universal

iPod docking adapter for your

iPod (See section on " Selecting

the correct universal iPod

docking adapter".)

4. Place iPod in dock.

6. Turn the volume knob clock-

wise to apply power to the

Wireless Speaker.

Quick Start Guide

2. Connect the power supply

to the wall outlet.

5. Plug your Wireless Speaker

into any wall outlet.

7. Press the play button on

your iPod or the IR remote

wireless

Table of Contents

Do you have a question about the Eos Core System and is the answer not in the manual?

Page 1 Quick Start Guide Setting Up Your Eos System 1. Connect the power adapter 2. Connect the power supply cord to the Base Station to the wall outlet. (jack marked “DC15V”) 3. Select the correct universal 5. Plug your Wireless Speaker iPod docking adapter for your into any wall outlet. iPod (See section on “ Selecting the correct universal iPod docking adapter”.) 4. Place iPod in dock. 6. Turn the volume knob clock- 7. Press the play button on wise to apply power to the your iPod or the IR remote Wireless Speaker. wireless...
Page 2 Removing the Integrated Power Supply From the Wireless Speaker To use your Wireless Speaker on a desktop/bookshelf, remove the power supply from the wireless speaker by following these steps: 1. Press down on the top of the power supply. The swivel plate beneath the power supply will make a “click” sound and rotate outward. 2. Rotate adapter forward and remove the power supply from the enclosure. CLICK! Reattaching the Power Supply to the Wireless Speaker 1. Coil the cord around your hand. 2. Place the coil of cord in the bottom of the cavity. 3. Press lower edge of swivel plate to rotate forward 4. Insert the power supply into the cavity leaning forward. 5. Press down on the top of the power supply. 6. Rotate the power supply back to a vertical position (making sure to lock the tab at the top of the speaker cabinet with the groove at the top of the power supply.) CLICK!

Eos