Fusion CE-SS200 Operation Manual

Fusion CE-SS200 Operation Manual

Vehicle security system
Hide thumbs Also See for CE-SS200:

Advertisement

OPERATION MANUAL
VEHICLE SECURITY SYSTEM
CE-SS200

Advertisement

Table of Contents
loading

Summary of Contents for Fusion CE-SS200

  • Page 1 OPERATION MANUAL VEHICLE SECURITY SYSTEM CE-SS200...
  • Page 2: Table Of Contents

    • LED INDICATORS ......... . pg 5 our product, to our demo cars, to our events, FUSION is about •...
  • Page 3: Remote Operation

    REMOTE OPERATION LED INDICATORS Remote Button System Function Comment Function Arm & lock doors Disarmed Slow Flash Armed Car locator While armed Fast Flash Passive arming Disarm & unlock On (Solid) Valet mode doors 2 Flashes... pause Trigger on trunk / boot or Disarm &...
  • Page 4: Active Arming - Lock & Arm

    ACTIVE ARMING – LOCK & ARM PASSIVE DOOR LOCKING 1. Press (Lock) button on remote. The vehicle doors will automatically lock after passive arming cycle has been completed. 2. The siren will chirp once and indicator lights will flash once indicating that the system is now armed.
  • Page 5: Valet Mode

    VALET MODE TRIGGER THE SYSTEM The valet switch allows you to temporarily bypass all alarm function, When the CE-SS200 security system is armed, your vehicle is protected eliminating the need to hand your remote to parking attendants or as follows: garage mechanics.
  • Page 6: Car Locator

    Trigger The Anti-Car-Jacking Mode: TROUBLE SHOOTING a). 50 seconds after the system has been triggered the siren will start chirping for 15 seconds. PROBLEM POSSIBLE CAUSE ACTION Note: During this 15 seconds period of chirping, the user may push No Operation No power to alarm Check power the valet switch once to turn off the anti-car jacking feature.
  • Page 7: Trouble Shooting

    PUBLISHED BY FUSION ELECTRONICS LIMITED: when impact applied adjusted incorrectly refer to shock sensor Please remember to respect the local regulations: © Copyright 2007 by FUSION Electronics Limited. (pg8 Installation Hand in the non-working electrical equipment All rights reserved. Specifications and design are manual) to an appropriate waste disposal center.
  • Page 8 • • Specifications and design are subject to change without notice • •...

Table of Contents