EPSON AcuLaser C2000
4.2.17 Transfer Mechanism
4.2.17.1 Timing Roller Solenoid Removal
1. Remove the Rear Controller Cover. (See "Rear Controller Cover
Removal" on page -126.)
2. Remove the Rear Cover. (See "Rear Cover Removal" on page -127.)
3. Remove the PU1 Support Plate. (See "PU1 Support Plate Removal"
on page -135.)
4. Remove the harness of the Timing Roller Solenoid from the MCU
connector.
5. Remove 1 screw securing the Timing Roller Solenoid to the main
frame.
Figure 4-39. Timing Roller Solenoid Removal
Disassembly and Assembly
4.2.17.2 Middle Roller Solenoid Removal
1. Remove the Rear Controller Cover. (See "Rear Controller Cover
Removal" on page -126.)
2. Remove the Rear Cover. (See "Rear Cover Removal" on page -127.)
3. Remove the PWB-A Support Plate. (See "MCU (PWB-A Board)
Removal" on page -131.)
4. Remove the connector of the Middle Roller Solenoid and 1 screw.
Figure 4-40. Middle Roller Solenoid Removal
Disassembling Procedure
Revision C
143