Eonon D1301 User Manual page 27

TV OPERATIONS
TV
Selecting mode
Press SRC button on the remote control, on the panel or source selection touch-
able screen to select TV mode.
5: 115.25
4: 44.25
Searching a channel
Automatic tuning:
Press / buttons on the panel, or
buttons on the touchable screen to start auto searching the channel downward or upward.
Manual tuning:
Press and hold repeatedly
or SEEK+/SEEK- buttons on the touchable screen to start manual searching the channel
downward or upward.
To Store a station automatically
Press and hold AMS button on the remote control or press AMS on the touchable screen .
The unit will search for channels and store them under preset numbers in order of signal
.
strength.
Selecting channel
1.Press / on the remote control to select previous or next stored channel.
2.You can Press(1-9) number button directly on the remote control to select preset
channel. To select more than 10 channel number, firstly press GOTO button, then press
the corresponding number buttons.
3. Press the needed channel number on the touchable screen. To select a page containing
the needed channel number, press CH-/CH+ buttons on the screen.
Selecting TV system
Press repeatedly PAL-I button on the touchable screen
different country.
Note:
When the TV channel picture is being broadcasted, touch the screen to
return to the TV mode menu. The TV mode menu will be concealed when
any operation is not performed within 5seconds.
TV
PAL-I
0: 44.25 1: 55.75
Ant-1 CH:0
2: 63.75 3: 77.25
44.25Mz
5: 115.25
4: 44.25
CH- CH+ AMS Seek- Seek+
/ buttons on the remote control or SEEK-/SEEK+
/ buttons on the panel,
SYS
/ buttons on the remote control
to change the TV system for
27