Making Changes With Function Mode; Disabling The Guide Tone Feature (For Button Operation) - Eclipse CD3424 Owner's Manual

Basic operation

Making changes with Function Mode

A variety of settings can be changed.
1
Press the [FUNC] button.
The function mode is activated.
Turn [SEL] button in either direction to display setting
2
items for selection.
Setting items will be displayed in the following order when the
[SEL] button is turned to the right.
GUIDE TONE

Disabling the guide tone feature (for button operation)

The receiver is set at the factory to emit a beep tone in
response to button operation. The guide tone feature may be
disabled in the following procedure:
Turn [SEL] button to select GUIDE TONE.
1
Press the [SEL] button.
2
The Guide Tone Mode will be switched ON/OFF.
3 Turn [SEL] button to select ON or OFF.
Press the [RTN] button.
4
At this time, other adjustments can also be made in
Function Mode.
5 Press the [FUNC] button to exit Function Mode.
[RTN] button
CLOCK ADJ
28
[SEL]
button
[FUNC] button