Lenovo ThinkStation D10 User Manual page 67

. AT m n
m n
X4
Z_ Z0
Z1
m n
&C_ &C0
&C1
&D_ &D0
&D1
&D2
&D3
&F_ &F
&G_ &G0
&G1
&G2
&K_ &K0
&K3
&K4
&K5
&K6
&M_ &M0
&P_ &P0
&P1
&P2
&P3
&R_ &R0
&R1
&S_ &S0
&S1
&T_ &T0
&T1
&T3
&T4
&T5
bI
All responses and dial tone and busy signal
detection
Reset and retrieve active profile 0
Reset and retrieve active profile 1
bI
Force Carrier Detect Signal High (ON)
Turn on CD when remote carrier is present
Modem ignores the DTR signal
Modem returns to Command Mode after DTR
toggle
Modem hangs up, returns to the Command
Mode after DTR toggle
Resets modem after DTR toggle
Recall factory default configuration
Guard tone disabled
Guard tone disabled
1800Hz guard tone
Disable flow control
Enable RTS/CTS hardware flow control
Enable XON/XOFF software flow control
Enable transparent XON/XOFF flow control
Enable both RTS/CTS and XON/XOFF flow
control
Asynchronous operation
US setting for off-hook-to-on-hook ratio
UK and Hong Kong off-hook-to-on-hook ratio
Same as &P0 setting but at 20 pulses per minute
Same as &P1 setting but at 20 pulses per minute
Reserved
CTS operates per flow control requirements
Force DSR Signal High (ON)
DSR off in command mode, on in on-line mode
Ends test in progress
Perform Local Analog Loopback Test
Perform Local Digital Loopback Test
Grant Remote Digital Loopback Test request by
remote modem
Deny Remote Digital Loopback Test request
A.
59