Selecting The Dishwashing Cycle (Cycle Table) - AEG FAVORIT 44080 i User Manual

20
In daily use
If you want to use 4in1 products
When using "4 in 1" detergents that integrate also anti glass corrosion agent
into "3 in 1" formula, please follow the same indication as given for "3 in 1" de
tergents.

Selecting the dishwashing cycle (Cycle Table)

Dishwashing
cycle
AUTOMATIC
Dinner service and
2)
(50° 65°)
cookware
30 MIN
Dishes, excluding
3)
(60°)
saucepans
INTENSIV
Dinner service and
4)
CARE 70°
cookware
Dinner service and
ECO
cookware, tempera
5)
50°
ture sensitive
crockery
1) The consumption values were obtained under standardised conditions. They depend on how full the bas
kets for the dishes are. Variations are therefore possible in practice.
2) When using this cycle the degree of water clouding determines the amount of soiling on the dishes. The
length of the cycle and water and energy consumption can vary greatly – depending upon the load and
how dirty the dishes are. Depending upon the soiling, the temperature of the water will be automatically
adjusted to between 50°C and 65°C.
3) When using this cycle, only load the dishwasher half full.
4) During the final rinse, the temperature is increased to 68° for 10 minutes to sanitize e.g. babies' bottles,
plastic chopping boards or jam jars.
5) Test programme for Test Institutes
Suitable
for:
normally soiled,
dried on food remains
just used, lightly to nor
mally soiled
heavily soiled,
dried on food remains,
in particular protein
and starch
normally soiled
Type of
soiling
•
•
•
Programme Consumption
sequence
• • •
• •
• • •
• • • •
1)
values