How To Operate The Esn (Key Cd) Security; How To Program The Key Cd - Eclipse CD3414 Owner's Manual

ESN security operating procedure

How to operate the ESN (Key CD) security

How to program the Key CD

Check that the Power is OFF.
1
2 Press and hold button [6], then the [FUNC] button, and
hold both for more than one second.
A [SEC] message appears, then in two seconds it will
change to [DISC].
The CD3414 is now ready to accept your Key CD in the CD
slot.
If a CD has already been inserted, a [SEC] message appears,
and then the CD is ejected.
ATTENTION
3 Insert the CD into the slot.
A [SEC] message appears, then the Key CD is ejected.
•If there is a problem with the inserted CD, an [ERR] message
will appear for two seconds and the CD will be ejected. Reinsert
ATTENTION
the ejected CD.
•If a CD causes the [ERR] message to appear twice in a row, a
[CHANGE] message will appear for two seconds. Try another
CD.
•The Security indicator will flash whenever the vehicle's ignition
is switched off.
Button [6]
16
[FUNC] button