Your Macintosh - Casio Exilim EX-ZS12 User Manual

. To connect the camera to your computer and save files
1.
Turn on the camera. Next, press [SET] and then display the REC menu
(page 54) or the PLAY menu (page 70).
2.
On the "Set Up" tab, select "USB" and then press [6].
3.
Use [8] and [2] to select "Mass Storage", and then press [SET].
4.
Turn off the camera and
then use the USB cable
that comes with the
camera to connect it to

your Macintosh.

• Connecting the camera to
a computer with a USB
cable starts charging of
the camera's battery
(page 17).
• Make sure that you insert
the cable connector into
the USB/AV port until you
feel it click securely into
place. Failure to insert the
connector fully can result
in poor communication or
malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the camera
if you connect via a USB hub. Always connect directly to
the computer's USB port.
USB port
Large connector
Making sure that the
connector is towards the lens side, connect the
cable to the camera.
94
USB cable
(included with camera)
[USB/AV]
port
Small connector
mark on the USB cable
Using the Camera with a Computer