Displaying The Title/Text - Alpine CRA-1667RF Owner's Manual

Basic Operation
)
DISP/SETUP
(
POWER

Displaying the Title/Text

It is possible to display the CD title if the title has been
previously inputted. For details, see "Titling Disc" (page
5). Text information, such as the disc name and the track
name, will be displayed if playing a CD text compatible
disc. It is also possible to display the folder name, the
file name, and the ID3 tag, etc. while playing MP3 files.
1
Press the DISP button of the Remote Display or the
Remote Control.
The mode will change every time the button is
pressed.
About "Title" and "Text"
Title: With this device, it is possible to input the CD name
(refer to page 5). This inputted name is referred to
as a "title."
Text: Text compatible CDs contain text information such
as the disc name and track name. Such text
information is referred to as "text."
CD Changer mode:
ELAPSED TIME DISPLAY
TEXT DISPLAY (DISC NAME)
TEXT DISPLAY (TRACK NAME)
TITLE DISPLAY
MP3 CD Changer mode:
ELAPSED TIME DISPLAY
FOLDER NAME DISPLAY
FILE NAME DISPLAY
ID3 TAG DISPLAY
FRAME DISPLAY
TITLE DISPLAY
4
-EN
Rotary encoder
↓
↓
∗1
↓
∗1
↓
↓
↓
↓
↓
∗2
↓
∗3
↓
g
-/J
∗1
Displayed during playback of a disc with CD Text.
"NO TEXT" will be displayed when the CD contains
no Text data.
∗2
If an MP3 file contains ID3 tag information, all the
ID3 tag information is displayed (e.g., track name,
artist name, and album name). No other information
is displayed.
"NO TAG" will be displayed when an MP3 file
contains no ID3 tag information.
∗3
The recording sampling rate and bit rate of the MP3
file are displayed.
NOTES
• Some characters may not be displayed correctly with this
device, depending on the character type.
• The CD changer must also be CD Text compatible for the Text
information to be displayed.
• When the Scroll Setting (refer to page 6) is set to "SCR
OFF", press the TITLE button on the Remote Control to
scroll the Text information only once (TEXT DISPLAY,
FOLDER NAME DISPLAY, FILE NAME DISPLAY or ID3
TAG DISPLAY mode).
• "NO SUPPORT" is displayed when the desired text
information cannot be displayed on this unit.
• If the title was not previously input, "NO TITLE" is
displayed.
POWER
TITLE
8
f
9
DISP/
SETUP