Specifications; Power Output - Cary Audio Design CAD-211M Operating Manual

SPECIFICATIONS

Operating the CAD-211M amplifiers is a simple procedure since each unit is designed for
long term stability in virtually any home operating situation. Therefore, if the unit is
operated outside the parameters outlined in this owner's manual, damage may result.
Please read this manual carefully before putting your new Cary Audio Design
CAD-211M mono block amplifier into operation.
The following definitions are applicable to this manual. These definitions must be
followed explicitly.
WARNING: ELECTRICAL HAZARD! MISUSE OR FAILURE TO FOLLOW
INSTRUCTIONS PROPERLY MAY RESULT IN PERSONAL
INJURY OR DEATH!
CAUTION: No risk of personal injury; however, misuse or failure to follow
instructions may result in damage of equipment.
NOTE: No risk of personal injury or equipment damage; however, misuse or
of the
The following section describes the CAD-211M basic specifications. Specifications are
subject to change without notice or obligation.

POWER OUTPUT:

FEEDBACK:
FREQUENCY
RESPONSE:
NOISE:
SENSITIVITY:
TUBE COMPLIMENT:
failure to follow instructions may prevent proper performance
equipment.
Specifications
80W
Zero
20Hz - 20KHz +
80dB Below Rated Output
2V
2 - 845 Output
1.2
2