Woofer Installation; Surface Mount Installation - Edge ED305-E1 Owner's Manual

WOOFER INSTALLATION GUIDELINES
involve the removal of the standard vehicle speakers. Please use the mounting
depth and hole cut dimensions as detailed in this manual for guidance.

WOOFER INSTALLATION

grill and the speaker using the provided screws. Be careful not to over tighten
the screws as it may cause damage to the grill.
TWEETER INSTALLATION GUIDELINES
Try and take into account the following when locating a suitable position.
For optimum staging try and locate a position that is higher than the woofer but
It is vital that the tweeter is adjusted so that it is focused towards the listener.

SURFACE MOUNT INSTALLATION

casing in the correct position.
Using this base mark the two mounting holes and the hole for the wire to pass
through.
hole for the cable and ensure that the hole cut for the cable is big enough and
will not cause the cable to become chaffed in any way.
Pass the tweeter cable through the bottom of the case and through the
previously drilled hole.
Secure the base of the tweeter housing with the screws provided.
Finally, angle the tweeter so that it is focused towards the listener.