Safety Devices; Operating Controls - Elektra Beckum TopLine DH 315 Operating Instructions Manual

Safety devices

Anti-kickback lock (A)
The anti-kickback lock prevents a workpiece being
thrown back against the operator by the rotating
cutterblock.
The anti-kickback lock must not be bent.
A
Cutterblock cover (B)
The cutterblock cover prevents that the upper part
of the cutterblock can be touched from the top.
While the machine is not unplugged and the cutter-
block has not stopped, the cutterblock cover must
be installed.
Instead of the cutterblock cover a dust extraction
adaptor can be installed.
B
DH 315

Operating controls

On/off switch
· To switch ON = press green switch button.
To switch OFF = press red switch button.
3
An undervoltage relay trips in the event of a
voltage failure, to prevent a restarting of the
machine when the power is restored. To
restart the machine the green button must be
actuated again.
Reset button for overload relay
The planer/thicknesser has a build-in overload pro-
tection (arrow). This stops the machine if the motor
becomes too hot. To restart the planer/thicknesser:
1. If necessary, let motor cool down;
2. depress the reset button;
3. press green switch button.
Rise and fall mechanism
With the rise and fall mechanism the planing thick-
ness (= workpiece thickness after thicknessing) is
set. Workpieces of up to max. 153 mm thickness
can be worked.
3