Raise Bobbin Thread - White-Westinghouse Mighty Mender WW-100 Instruction Manual

01/30/2008
3'.A!3E THE BOBBIN THREAD
1. Raise the presser
foot
by
pulling up the presser
bar lifter.
2. Hold the top thread and turn the handwheel
counterclockwise to make the needle go down
and back up and you will
see a
loop formed by
the bobbin thread.
3. Open up the loop to find the thread end of
bobbin thread. If
you
find it is difficult to
open up by
hands,
you can
use the flat side
of seem ripper to help.
4. Pull both thread ends to the back of the machine
and slide the bobbin cover back into place. Then
you can start mending now.