Sansui DFTV270 Owner's Manual page 11

Connections to other equipment
To connect the TV to a DVD player with component video
If your DVD player has component video out jacks, connect your TV to a DVD player using a component video
cord. It can greatly enhance picture quality and performance.
To AUDIO OUT
NOTE:
This unit is only capable of displaying 480i interlaced signal when connected to a digital device with component video
outputs. If you input a 480p, 720p or 1080i signal to the component video inputs, "COMPONENT" and "NO SIGNAL
OR NOT SUPPORTED VIDEO RESOLUTION" will be displayed on a black screen. If this screen appears, set the
digital device's component output to 480i.
To connect the TV to a set-top box
If you connect a set-top box, connect your TV to it by using a component video cord.
To AUDIO OUT
NOTE:
This unit is only capable of displaying 480i interlaced signal when connected to a digital device with component video
outputs. If you input a 480p, 720p or 1080i signal to the component video inputs, "COMPONENT" and "NO SIGNAL
OR NOT SUPPORTED VIDEO RESOLUTION" will be displayed on a black screen. If this screen appears, set the
digital device's component output to 480i.
To connect an audio system
Amplifi er
To COMPONENT OUT
Y P P
B R
VIDEO cord (not supplied)
AUDIO cord (not supplied)
To COMPONENT OUT
VIDEO cord (not supplied)
AUDIO cord (not supplied)
To AUDIO IN
AUDIO cord (not supplied)
To COMPONENT IN
To COMPONENT IN
To AUDIO OUT
(continued)
Rear of the TV
Rear of the TV
Rear of the TV
11