Setting The Picture Size - Sansui HDLCDVD320 Owner's Manual

Setting the picture size

You can view 480i and 480p format
programs in a variety of picture
sizes—NATURAL, CINEMA
WIDE1, CINEMA WIDE2, CINEMA
WIDE3, and FULL.
NOTE:
Some High Definition and/or Digital
broadcasts may not allow you to
change the picture size.
26
Selecting the picture size
1
Press SETUP/TV MENU. Press
or to select
menu. Press ▲ or ▼ to select
"PICTURE SIZE".
2
Press or . The PICTURE
SIZE menu will appear. Press ▲/
▼ or a Number button (0-4) to
select the desired picture size, as
described below and on the next
page, then press ENTER.
3
Press EXIT to return to the normal screen.
NOTE:
You can also display the PICTURE SIZE menu by pressing the
SCREEN SIZE button on the remote control.
NATURAL picture size
In some cases, this image will display the size of standard 4:3
with a black side bar.
CINEMA WIDE1 picture size (for 4:3 format programs)
To fill the screen, the right and left edges are extended, however;
the center of the picture remains near its former ratio.
The top and bottom edges of the picture may be hidden.
(SETUP)
SETUP
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE
ASPECT
SIGNAL METER
AUTO SHUT OFF
:SELECT
FILM
OFF
OFF
:ADJUST
PICTURE SIZE
0:NATURAL
1:CINEMA WIDE1
2:CINEMA WIDE2
3:CINEMA WIDE3
4:FULL
[0-4] : SELECT