AEG LAVAMAT 14810 Instruction Booklet page 40

Something not working?
Spinning starts late or the
machine does not spin
The machine will not dry or
the laundry is not dry
enough
40
Problem
The unbalance detection
device that prevents
excessive vibration during
spinning has cut in.
The water tap is not open
(E10).
The drain filter is clogged.
The drying time or degree of Select the required function.
dryness has not been selected.
An appropriate drying time
has not been chosen.
There is too much laundry
inside the appliance.
Possible cause Solution
If the laundry is not evenly
distributed inside the drum
at the beginning of the
spin cycle, the machine
detects this and tries to
redistribute it more evenly
by means of a few drum
rotations.
Only when the laundry is
more evenly distributed
will the spin cycle be
performed, at a lower speed,
if the laundry is not evenly
distributed.
If, after about 15 minutes,
the laundry is still tangled,
the machine will not spin.
Therefore, if the laundry is
still wet at the end of the
cycle, it is advisable to
redistribute it manually
inside the drum and to
select the spin programme.
Open the water tap.
Clean the filter.
Select the appropriate
drying time suitable for the
required degree of drying,
according to the type of
fabric (cottons or synthetics).
Reduce the load.