Table of Contents
Advertisement
The Learning Remote Control
Remote Zone Control
1. Programming Status LED
This three-color LED flashes when programming infrared codes
into the learning remote control.
2. Device Buttons
The device buttons allow you to choose different "pages" to
control up to six additional components. Note: Press the AVC
button first to control the main zone of the AVC-1800 and press
the Zone button to operate the remote zone.
3. On-Off Button
Press the On button to turn the AVC-1800 on for the remote
zone; press the On button again to turn it off. This operation is
different for the main zone.
4. Volume Buttons
The Volume
and
buttons adjust the master volume up and
down in 1 dB steps.
5. Mute Button
Press the Mute button to interrupt the audio signal from reaching
the zone output jacks of the AVC-1800.
6. Tune
Button
When the tuner is activated, pressing the Tune
the previous available broadcast frequency.
7. Tune
Button
When the tuner is active, each press of the Preset
selects the previous preset station.
8. Preset
Button
When the tuner is active, each press of the Preset
selects the previous preset station.
9. Preset
Button
When the tuner is active, each press of the Preset
selects the next preset station.
10. Direct Access Source Buttons
These buttons provide direct access to each of the seven inputs
and the tuner.
11. Tuner Functions
These buttons control the tuner functions of the AVC-1800
including Memory, Mono, Manual Tuning, and AM/FM band
selection.
12. Numerical Preset Buttons 1-10, 11-20, 21-29
Pressing any of these numerical preset buttons allows you to
select the radio station previously memorrized between 1 and
10. To access preset numbers above 10, press the numerical
button again to add 10 to that preset number. For example,
pressing 5 twice accesses preset 15 and three times accesses
preset 25.
16
13. Macro Buttons
The four macro buttons allow you to program a series of
commands for one touch operation of multiple functions of
different components such as turning on the AVC-1800 and
your DVD player and selecting play.
14. Light Button
The Light button illuminates all the remote control buttons for
approximately 5 seconds.
1
button selects
button
6
button
8
button
10
13
Press the Zone button
to control the remote
zone of the AVC-1800.
AV C
ZONE
DV D
C D
S AT
T V
V C R
C B L
On
Mute
Vo l u m e
Tune
Tune
Enter
Vo l u m e
Preset
Preset
Disc
Vid 1
Vid 2
Vid 3
Vid 4
Tuner
Aud 1
Aud 2
Aud 3
Mem
Mono
Man
FM/AM
1
2
3
4
5
6
7
8
9
10
MAC 1
MAC 2
MAC 3
MAC 4
Light
2
3
4
5
7
9
11
12
14
Hide quick links:
Advertisement
Table of Contents
