Table of Contents
Advertisement
WASHING 2 KG OF MIXED FABRICS AT 50°C
Suppose you have 2 kg of mixed fabrics to wash. They
are rather delicate fabrics and should not be washed at a
high temperature.
1. Load the laundry
Open the door by pulling the catch outward.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
"MAX" mark in the drawer). Close the drawer gently.
3. Select the required option(s)
Depress SPIN REDUCTION
WASH
and/or RINSE HOLD
required.
.
and/or QUICK
button, if
10
4. Select the required programme
Turn the programme selector dial clockwise to the
programme H.
5. Start the machine
Before starting up the machine check that:
●
the appliance is plugged in
●
the water supply tap is turned on
●
the drain hose is correctly and securely positioned
●
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button
illuminate and the machine starts operating.
6. At the end of the programme
The machine stops automatically.
If you have depressed the RINSE HOLD
the machine will stop with the water of the last rinse left
in the tub, to prevent the fabric from creasing. To drain
the water and spin, release the same button again. To
drain only, select programme "R".
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
water tap. Leave the door open to prevent the formation
of mildew and unpleasant smells.
: the mains-on light will
button,
Hide quick links:
Advertisement
Table of Contents
