Select An Additional Rinse; Altering An Option Or A Running Programme; Interrupting A Programme - AEG LAVAMAT 63742 VI Instruction Booklet

18 Use
Selecting the delayed start.
Select the programme and the required options.
●
Select the delay start.
●
Depress button
●
will start after the selected delay has expired.
Cancelling the delayed start
set the washing machine to PAUSE by pressing the button
●
press button
●
press the button
●
Important!
The selected delay can be changed only after selecting the washing programme
●
again.
The button

Select an additional rinse

This appliance is designed for saving water. However, for people with a very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).
Press buttons
comes on. This function stays permanently on. To remove it press the same but-
tons again until the pilot light

Altering an option or a running programme

It is possible to change some options before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
8
button . Changing a running programme is possible only by resetting it. Turn
the programme selector dial to
Start the new programme by pressing the button
the tub will not be emptied out.

Interrupting a programme

Press button
light starts blinking. Press the button again to restart the programme.
8
: the machine starts its hourly countdown. The programme
9
once until the symbol
8
again to start the programme.
9
can not be selected with DRAIN programme
2 3
and simultaneously for some seconds: the pilot light
8
to interrupt a programme which is running, the corresponding
0' is displayed;
10.3
goes off.
O
and then to the new programme position.
8
;
.
8
again. The washing water in
10.3