Fuse Recommendations - Diamond Audio Technology D5 300.4 Owner's Manual

DIMENSIONS
D5 300.4
Length: 12 1/2"
Width: 12"
Height: 2 3/4"
CONTINUOUS RMS OUTPUT POWER
Note: Full Rated Power is generated at all voltages between 11 and 14.5VDC.
D5 300.4
37.5W x 4 @ 4 Ohm Stereo
75W x 4 @ 2 Ohm Stereo
150W x 2 Bridged @ 4 Ohms
(minimum impedance)
CROSSOVER SPECIFICATIONS
Quantity: 2
Type: Fully Independent and Adjustable Highpass and
Lowpass
Slope: 12 dB/oct. Stereo, 24 dB/oct. Lowpass Mono (ch 3/4)
Alignment: Butterworth

FUSE RECOMMENDATIONS

D5 Professional Reference Series Amplifiers come with circuit board mounted
fusing. In addition to that we recommend that you install the correct size
fuse/holder combination to the main power cable within 18 inches of the
battery. This will protect your vehicle from fire damage due to a short circuit
to the chassis or vehicle body. If a single amplifier is installed, follow the fuse
recommendation below. If installing multiple amplifiers, add up the total fuse
ratings of all installed amplifiers. This should be used as your main fuse rating.
Amplifier
D5 300.4
D5 600.4
D5 600.4
Length: 17"
Width: 12"
Height: 2 3/4"
D5 600.4
75W x 4 @ 4 Ohm Stereo
150W x 4 @ 2 Ohm Stereo
300W x 2 Bridged @ 4 Ohms
(minimum impedance)
Maximum Fuse Rating
60
90
Diamond Audio Technology 2