Bushnell X-8 TRAIL CAM 119327 Instruction Manual page 11

SETUP MENU: Items/Settings/Description
Menu Item
Date
Time
Delay
Settings
(Bold=default)
Year, month,
and day
Hour and
minute
Minutes (0-10)
or seconds
(0-59)
Default delay
time= 10 sec.
Description/Operation
Press Ok and use the Up/Down
buttons (to change the setting),
then press Ok again to go to the
next date parameter and repeat,
to set the current year, month,
and day. Press Ok after setting
the day to move on and set the
Time (next item)
Press Ok and use the Up/
Down buttons (to change the
setting) then Ok again ( to move
to the next field) to set the
current hour (24-hr format only,
"00"=midnight, "12"=noon) and
minute.
Selects the length of time that
the camera will "wait" until it
responds to any additional
triggers from the PIR after an
animal is first detected and
remains within the sensor's
range. During this user set
"ignore triggers" interval, the
camera will not capture photos/
videos. This prevents the card
from filling up with too many
redundant images. Settings
begin with 10 second default
time. Press Ok, set the delay time
in minutes (if desired), press Ok
and set the delay in seconds.
11