Using Manual Focus - Casio QV-R40 Recording Manual

OTHER RECORDING FUNCTIONS

Using Manual Focus

With the Manual Focus mode, you can adjust the focus of
an image manually. The following shows focus ranges in
the Macro mode for two optical zoom factors.
Optical Zoom Factor
1X
3X
1.
Keep pressing [ ] (
) until the focus
mode indicator shows
MF.
• At this point, a
boundary also appears
on the display,
indicating the part of the
image that will be used
for manual focus.
Approximate Focus Range
10cm (3.9˝) to infinity (∞)
60cm (23.6˝) to infinity (∞)
Boundary
2.
While watching the
image on the monitor
screen, use [ ] and
[ ] to focus.
To do this:
Focus out on the subject
Focus in on the subject
• Pressing [ ] or [ ] causes the area inside of the
boundary displayed in step 1 to fill the monitor
screen momentarily to aid in focus. The normal
image reappears a short while later.
3.
Press the shutter release button to record the
image.
IMPORTANT!
• In the Manual Focus mode, the [ ] and [ ] keys
adjust focus, even if you used key customization to
assign other functions to them (page 89).
68
Manual focus position
Do this:
Press [ ].
Press [ ].