Cable Tv Connections - Sansui DTV3200 Owner's Manual

32” mts stereo color television with digital tuner
Table of Contents

Advertisement

This unit has an extended tuning range and can tune most cable channels without using a Cable TV
Converter box. Some Cable TV companies offer "premium pay channels" in which the signal is
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device
which is generally provided by the Cable TV company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
75 ohm
Coaxial Cable
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect the
incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable,
connect the output jack of the Converter/Descrambler box to the RF IN Jack on the unit. Follow the connections
shown below. Set the unit to the output channel of the Converter/Descrambler box (usually channel 3 or 4) and
use the Converter/Descrambler box to select channels.
Incoming 75 ohm
CABLE TV Cable
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS
If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require the
use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from
the Cable TV company or an electronics supply store). Follow the connections shown below. With the switch in the
"B" position, you can directly tune any nonscrambled channels on your unit. With the switch in the "A" position, tune
your unit to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler
box to tune scrambled channels.
Incoming 75 ohm
CABLE TV Cable
For basic cable service not requiring a Converter/Descrambler
RF IN
box, connect the 75 ohm Coaxial Cable directly to the RF IN
jack
Jack on the back of the unit.
Converter/
Descrambler
Converter/
Descrambler
Splitter

Cable TV connections

75 ohm Cable to unit
75 ohm Cable
A
A/B Switch
B
RF IN
jack
RF IN
jack
to unit
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents