Wipers And Washers - Saab 9-5 Owner's Manual

95_US_MY09.book Page 200 Tuesday, April 15, 2008 11:03 AM
200 Car care and technical information

Wipers and washers

Check and clean all wiper blades regularly.
If poor wiper performance is experienced,
clean the windshield with a quality glass
cleaner. This is particularly important if the
car has been through an automatic car
wash, as these sometimes leave a wax
coating on the windshield.
If wiper performance is still unsatisfactory,
fit new blades.
Changing the windshield wiper
blades
1 Hold the wiper arm and push the two
catches off the arm.
2 Move the blade along the extension of
the arm.
Fitting the wiper blade
1 Slide the new blade onto the arm until it
locks in position. Make sure that the end
of the wiper arm is within the blade
bracket.
2 Check that the blade is seated correctly.
Rear window, SportCombi
1 Detach the blade from the arm by pres-
sing the blade's mounting from underne-
ath.
2 Install a new blade by pressing the shaft
of the blade in the arm's mounting.
The washer jet, which is located next to the
high-mounted brake light, is not adjustable.