Panasonic Viera ET5A series Operating Instructions Manual page 38

Menu Item
Bass
Treble
Equaliser
Balance
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Speaker Distance to
Wall
Preferred Audio
Language
MPX
38
Adjustments / Configurations (alternatives)
Adjusts level to enhance or minimise lower, deeper sound output
Adjusts level to enhance or minimise sharper, higher sound output
Adjusts the frequency level to suit your favourite sound quality
● This function is available when [Mode] is set to [User].
●
Select the frequency and change the frequency level by using the cursor button.
● To enhance the bass sound, raise the level of the lower frequency. To enhance
the treble sound, raise the level of the higher frequency.
● To reset the levels of each frequency to the default settings, select
[Reset Equaliser Settings] by using the cursor button, and then press the OK
button.
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings
[Off] / [V-Audio] / [V-Audio Surround] / [V-Audio ProSurround]
[V-Audio]:
Provides a dynamic enhancer of width to simulate improved spatial effects.
[V-Audio Surround]:
Provides a dynamic enhancer of width and depth to simulate improved spatial
effects.
[V-Audio ProSurround]:
Provides a more progressive enhancer and reverberation to simulate improved
spatial effects.
Automatically regulates large sound level differences between channels and
inputs [Off] / [On]
Adjusts the volume of individual channel or input mode
Compensates for the low frequency sound due to the distance between the
speakers and the wall [Over 30cm] / [Up to 30cm]
●
If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
●
If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
Selects the preferred language for digital TV multi audio (depending on the
broadcaster) [English] / [Maori] / [French] / [German] / [Italian] / [Spanish] /
[Korean] / [Chinese-Mandarin] / [Chinese-Cantonese] / [Japanese] / [Hindi]
Selects multiplex sound mode (if available)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
●
For Analogue TV