Something Not Working; Troubleshooting - AEG 1261 Instruction Booklet

Something not working?

If, during the spin cycle, the machine makes an unusual
whistling noise, different from the noise made by tradi-
tional washing machines, this is due to a new type of
motor.
If water is not visible in the drum, this is due to
the modern technology of new washing
machines that use less water than traditional
machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the
instructions below.
If you call out an engineer when one of the following problems arises,
or to repair a fault due to incorrect use, the call-out will be charged
even if requested within the guarantee period.
If after all checks, the problem persists, contact your local AEG Service
Force Centre.
Problem
The machine does not work
Possible cause
The ON/OFF button
has not been depressed.
The main electrical fuse or Replace the fuse.
the fuse in the plug has
blown.
The door is not properly
closed.
The plug is not connected. Insert the plug.
The programme selector
dial is not correctly
positioned.
Solution
Depress the button.
Close the door; the click
of the lock should be heard.
Turn the dial to the correct
position.
31