Audible Signals; Select And Start A Washing Programme - Zanussi ZDT 6454 User Manual

Audible signals

Audible signals have been introduced to help
indicate which operations the dishwasher is
performing:
• setting the water softener,
• end of the programme,
• intervention of an alarm due to malfunction.
IMPORTANT!
Factory setting: audible signals activated.
Deactivation/activation of the audible sig-
nals
1. Press On/Off button. The dishwasher must
be in setting mode.
2. Simultaneously press and hold function
buttons B and C until the lights of function
buttons A, B and C start flashing.

Select and start a washing programme

IMPORTANT!
Select the washing programme and delay start
with the door slightly opened. The start of the
programme or the countdown of the delay start
will occur only after the closure of the door. Until
then it is possible to modify the set made.
6
3. Press function button C, the lights of func-
tion buttons A and B turn off while the light
of function button C goes on flashing. At
the same time the end of programme in-
dicator light illuminates indicating that the
audible signals are active.
4. To deactivate teh audible signals press
again function button C, the end of pro-
gramme indicator light turns off, indicating
that the audible signals have been deacti-
vated.
5. To memorise the operation switch off the
dishwasher by pressing the On/Off button.
To activate again the audible signals simply
follow the above operations until the end of
programme indicator light illuminates.
1. Check that the baskets have been loaded
correctly and that the spray arms are free
to rotate
2. Check that the water tap is opened
3. Press the On/Off button. The dishwasher
must be in setting mode.