Filling With Rinse Aid; Adjusting The Dosage Of Rinse Aid - Zanussi ZDT 6454 User Manual

Filling with rinse aid

CAUTION!
Never fill the rinse aid dispenser with any other sub-
stances (e.g. dishwasher cleaning agent, liquid de-
tergent). This would damage the appliance.

Adjusting the dosage of rinse aid

Increase the dose if there are drops of water or
lime spots on the dishes after washing.
Open the lid.
Open the lid.
Fill up with rinse aid. The
maximum level for filling
is indicated by "max"
IMPORTANT!
Top up the rinse aid when the light on the control panel
illuminates.
Reduce the dose if there are whitish streaks on
the dishes or a bluish film on glassware or knife
blades.
Set the dosage level.
(The dose is factory set in
position 4).
Clean up any rinse aid
which overflows. Close
the lid and press until it
locks.
Close the lid and press
until it locks.
13