Digital Display; Multitab Button - Zanussi ZDF3020 User Manual

1)
Rinse aid
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme
operates.
Programme knob
• To switch on the appliance or to set a washing pro-
gramme, turn the programme knob clockwise or coun-
terclockwise. The programme marker on the pro-
gramme knob must agree with one of the washing pro-
grammes on the control panel. If the programme mark-
er agrees with a washing programme, the digital dis-
play shows the time duration of the programme. If the
programme marker does not agree with a washing
programme, the digital display shows two horizontal
bars.
• To switch off the appliance, turn the programme knob
until the programme marker agrees with the off indi-
cator.
Use the programme knob for these operations:
– To set the water softener. Refer to 'Setting the water
softener'.
– To deactivate/activate the rinse aid dispenser. Refer to
'Multitab function'.
Start/cancel button
Use the start/cancel button for these operations:
• To start the washing programme. Refer to the chapter
'Setting and starting a washing programme'.
• To cancel a washing programme in progress. Refer to
the chapter 'Setting and starting a washing pro-
gramme'.
• To set the water softener level. Refer to the chapter 'Set
the water softener'.
• To deactivate/activate the rinse aid dispenser. Refer to
the chapter 'Multitab function'.

Multitab button

Press this button to activate/deactivate the multitab func-
tion. Refer to the chapter 'Multitab function'.
Delay start button
Use the delay start button to delay the start of the washing
programme with an interval between 1 and 19 hours. Refer
4
Indicator lights
Comes on when it is necessary to fill the rinse aid container. Refer to 'Use of rinse aid'.
to the chapter 'Setting and starting a washing pro-
gramme'.

Digital display

The display shows:
• Adjusted level of the water softener.
• Activation/deactivation of the rinse aid dispenser (only
with multitab function on).
• Programme duration.
• Remaining time to the end of the programme.
• End of a washing programme, the digital display shows
a zero.
• Number of hours in delay start.
• Fault codes.
Setting mode
The appliance is in setting mode when:
• One or more phase indicator lights are on.
• The time duration of the programme flashes in the
digital display.
The appliance must be in setting mode for these opera-
tions:
– To set a washing programme.
– To set the water softener level.
– To deactivate/activate the rinse aid dispenser.
The appliance is not in setting mode when:
• One or more phase indicator lights are on.
• The time duration of the programme does not flash.
In this condition cancel the programme to go back to the
setting mode. Refer to the chapter 'Setting and starting a
washing programme'.