Unpacking - Zanussi FLS 579 C Instruction Booklet

Unpacking

Before starting the machine up, the transport security
bolts must be removed as follows:
You are advised to keep all the packaging for re-use in
case the appliance has to be transported again.
Unscrew and remove the three rear transit bolts
(using a spanner).
Lay the machine gently on its back, making sure
that the hoses are not squashed.
We suggest a polystyrene angle bracket from the
packing is placed on the floor before tilting it back
to avoid the hoses being squashed.
Carefully remove the polyethylene bags located at
the base of the machine by pulling them toward the
centre of the machine.
Place the machine in an upright position and
remove the three plastic bolts.
Plug the 3 holes with the plastic plugs which you
can find in the envelope containing the instruction
booklet.
P0287
P0018
1
2
AL009
P0001
P0002
16 16