Electrolux 316488521 Installation, Use & Care Manual page 9

Step 4 Step 4 Step 4 Step 4 Step 4
Remove the junction box cover.
J-Box
Cover
Remove either the top or the back wiring knockout
according the preference and install an approved
wiring clamp
wiring
clamp
Installing the hood
Step 5 Step 5 Step 5 Step 5 Step 5
Remove the duct knockouts using a flat blade
screwdriver and a small hammer.
Use the screwdriver by knocking out the pannel in
similar fashion to a scalpel.
Take care of sharp edges.
Attention! Attention!
Attention! Attention! Attention!
If it is intended to use the hood in the recirculating
version do not remove any duct knockouts and order
the necessaruy charcoal filter from your supplier.
Round
R2
vertical
Rectangular
discharge
R1
vertical
discharge
Rectangular
R1
horizontal
discharge
R1 R1
R1= Remove rectangular duct knockout only. R1 R1
R2 R2 R2 R2 R2 = Remove semicircular and rectangular duct
knockouts.
9 9 9 9 9