Special Functions Special Functions; Clock Programming; Grease Filter Saturation Alarm; Charcoal Filter Saturation Alarm (Recirculating Accessories) - Electrolux 316488521 Installation, Use & Care Manual

Special functions

Clock programming

Clock pr Clock pr Clock pr Clock pr ogramming ogramming ogramming ogramming
• The clock can be reprogrammed at any time except during an active timed function.
• The clock can be displayed in a twelve hour format and valid clock times are from 1:00 to 12:59.
• The clock can be reprogrammed pressing the "T T T T T imer
adjusted with the " " and "
• The user can have minute increments / decrements of 1 minute, but if the user keep pressing the "
" " buttons for more than 1 second, the increments / decrements will be of 5 minutes.
During this option the control will round to the nearest 5 minutes.
• The user can finish on reprogramming the clock pressing the "T T T T T imer
• After 1 minute of no button pressed the control will accept the programmed clock time and will add one
minute to the set clock.
Gr Gr

Grease filter saturation alarm

Gr Gr ease filter saturation alarm ease filter saturation alarm ease filter saturation alarm ease filter saturation alarm
• After thirty fan functional hours, the display will show "Gr
When this icon is shown in the display, the grease filters installed are required to be washed.
• To reset the grease filter saturation alarm the user must press the "
action the icon "Gr Gr Gr Gr Grease filter ease filter ease filter" is not displayed, and the hood has the normal display operation. ease filter
ease filter
Char Char coal filter saturation alarm (Recir coal filter saturation alarm (Recir
Char Charcoal filter saturation alarm (Recir Char coal filter saturation alarm (Recirculating accessories) coal filter saturation alarm (Recir
• After one hundred and twenty functional hours of the fan, the display will show "Char
is active. When this icon flashes on display, the charcoal filters installed are required to be replaced or
reactivated.
• To reset the charcoal filter saturation indication the user must press the "
this time the icon "Char Char Char Charcoal filter Char coal filter coal filter coal filter coal filter" is not displayed and the hood has the normal display operation.

Audible signal activation and deactivation

Audible signal activation and deactivation
Audible signal activation and deactivation Audible signal activation and deactivation Audible signal activation and deactivation
• The audible signals can be activated or deactivated pressing the "Light
• If the audible signal is activated, a tone must sound and the "Snd
2 seconds.
• If the audible signal is deactivated, the "Snd
tone must sound.
Charcoal filter inclusion and exclusion (Recir Char Char coal filter inclusion and exclusion (Recirculating accessories) coal filter inclusion and exclusion (Recir coal filter inclusion and exclusion (Recir
Char Char coal filter inclusion and exclusion (Recir
• The charcoal filter inclusion or exclusion can be set by pressing the "
time for 5 seconds.
• The Inclusion or exclusion of charcoal filter must be selected while the lamps and the motor are OFF.
• When the charcoal filter has been excluded, the charcoal filter alarm is disabled.

Heat sensor

Heat sensor
Heat sensor Heat sensor Heat sensor
• The control is equipped with a heat sensor that will turn on the blower at second speed if excessive heat
occurs (over 158° F 158° F 158° F 158° F 158° F or 70°C 70°C) surrounding the control area. 70°C 70°C 70°C
• If the blower is OFF or if it is operating at first speed, the blower will be set automatically to second speed,
the display shows the word "CArE
• During this state, the user may raise the blower speed to third speed but can not decrease the speed.
• When the temperature level on the hood drops to normal, the blower will operate in the setting defined by
the user before the alarm occured.
Control buttons - Special functions
imer imer imer imer" button for 5 seconds, and after, the clock can be
" buttons. Colon ":" will flash indicating clock programming mode.
Gr Gr Gr Grease Filter
culating accessories) culating accessories)
culating accessories) culating accessories)
Snd Snd Snd Snd" symbol must appear on the display for 2 seconds and no
CArE CArE CArE" to indicate that heat sensor has detected an excessive heat. CArE
imer imer
imer imer" button.
ease Filter" if the fan is active. ease Filter ease Filter
ease Filter
" button for 5 seconds, after this
Char Char Charcoal Filter Char
" button for 5 seconds, after
Light Light" button for 5 seconds. Light Light
Snd Snd Snd" symbol must appear on the display for Snd
culating accessories) culating accessories) culating accessories)
culating accessories)
" and " " buttons at the same
"/
coal Filter" if the fan coal Filter coal Filter coal Filter
15 15
15
15 15