Internal Connections - RME Audio Project Hammerfall DIGI9652 User Manual

8.2 Internal Connections

The internal digital input (connector ST3 on the circuit board, CD IN) can be connected to the
digital output of an internal CD-ROM drive. This allows for a direct transfer of digital audio data
within the computer.
Since board revision 1.5 it also allows to use an AEBx-I, when a 3-wire cable connects ST7 on
both AEBx-I and Hammerfall.
Additionally board revision 1.5/1.6 offers two internal outputs, labeled ADAT1OUT (ST5) und
ADAT2OUT (ST9). These can be used to operate one AEBx-O each, for a maximum of 16
analog outputs. The audio data are the same as on the corresponding optical output.
User's Guide DIGI9652 © RME
8