RME Audio Hammerfall HDSP 9632 User Manual page 17

Pref. Sync Ref.
Used to pre-select the desired clock source. If the selected source isn't available, the unit will
change to the next available one. The current clock source and sample rate is displayed in the
AutoSync Ref display.
The automatic clock selec-
tion checks and changes
between the clock sources
Word Clock, ADAT and
SPDIF.
System Clock
Shows the current clock
state of the HDSP system.
The system is either Mas-
ter (using its own clock) or
Slave (see AutoSync Ref).
Breakout Cable
Checking 'XLR' lowers the
analog Line output level by
6 dB. Using the balanced
XLR output cable then
results in correct reference
levels.
Input Level
Choice of the reference level and with this of the sensitivity of the analog Line input.
Output Level
Choice of the reference level and with this of the level at the analog Line output.
Phones
The volume at the headphone output can be adjusted separately from the Line output. The sig-
nal can be lowered by 6 or 12 dB, or completely switched off via Mute.
User's Guide HDSP System HDSP 9632 © RME
17