Propellerhead ReCycle Operation Manual page 57

Hiding several Slices at the same Time
If you have several slices selected (see below) they will all get hidden when you
click on one of them.
Clicking on one of the selected slices...
... hides all of them.
Bringing back Hidden Slices
To "re-activate" a hidden Slice, simply click on it again with the Hide tool.
When do I use the Hide tool?
Use the Hide tool when you have a situation like the one below:
This slice is probably not
wanted.
In the example above, the Sensitivity slider had to be set to a fairly high value to
get the number of slices you see. But raising Sensitivity led to one unwanted
slice, splitting a sound in two. Hiding is the solution.
After Hiding the unwanted slice.
How do I find unwanted Slices?
Our most important tip is this: Always audition each slice to hear what they actu-
ally play. Try stepping through the loop with the "Play Slice and Move to Next"
button, and adjust the Slices until you hear them the way you want them.
Another good practice is to increase magnification slightly and scroll through the
slices to look for sounds that have been split unnecessarily.
For optimal results, combine the two techniques above.
55
SETTING SLICES AND LOOPS