Context Menu Items - Propellerhead ReCycle Operation Manual

Context Menu Items

Right-clicking (Windows) or [Ctrl]-clicking (MacOS) in different areas of the
waveform display will bring up context-sensitive menus. The context menus will
contain various items also found on the Edit and View menus, but there are
some additional items that are only available via context menus.
Main Waveform Display
The highlighted area indicates the main waveform area.
By right-clicking (Windows) or [Ctrl]-clicking (MacOS) in the main area of the
Waveform display brings up a context menu with the following items:
Menu Item Description
| |
Copy Loop See "The Edit Menu" above.
Set Left Locator to This Slice The Left Locator will be placed at the begin-
ning of the slice you clicked on.
Set Right Locator to This Slice The Right Locator will be placed at the end of
the slice you clicked on.
Set Loop Around This Slice The left and right locators will be placed at
the start and end of the slice you clicked on,
respectively.
Jump to Cursor See "The View Menu" above.
Magnify to Fit/Magnify to Fit See "The View Menu" above.
Loop
Magnify to Fit Slice This will zoom the display so that a single
slice (the slice you clicked on) will fit the win-
dow.
Slice Marker Strip
The highlighted area indicates the Marker strip area.
Right-clicking (Windows) or [Ctrl]-clicking (MacOS) in the marker strip (but not
directly on a slice marker handle), brings up a context menu with the following
items:
Menu Item Description
| |
Select All This will select all slices. See page 57.
Invert Selection See page 57.
Magnify to Fit/Magnify to Fit See "The View Menu" above.
Loop
47
THE RECYCLE WINDOW