Making a test run
1.
Clean the Refrigerator thoroughly. Wipe the external surface with a soft dry
cloth, the interior with a damp cloth.
2.
Keep the door open and plug the power cord into its own electrical outlet.
The interior lamp should lit.
3.
Turn the thermostat dial to "7". Close the door and allow the unit to operate
for 15-20 minutes. The evaporator should then show some traces of frost.
The compressor will run smoothly with just a soft humming sound.
4.
lf the test run is not satisfactory, check your power supply (blown fuse).
Contact your appliance dealer or appliance authorized Service Center if the
source of trouble cannot be traced.
Temperature Control
You can control the inside temperature by turning the thermostat dial.
Turn the button to the left for warmer temperature.
Turn the button to the right for colder temperature.
Making Ice Cubes
Fill the ice cube tray 3/4-full with cold water and
place it on the bottom of the freezer compartment.
When the ice-cubes are ready they can easily be
removed by simply twisting the both ends of the
ice cube tray.
4