Brother MFC-J615W Advanced User's Manual page 53

PhotoCapture Center
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo or
picture.
Press OK.
d
Press a or b to choose
Remove Red-Eye.
Press OK.
 When Remove Red-Eye is
successful, the photo with the effect
is shown. The adjusted part is shown
in a red frame.
 When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Press OK.
Note
Press # to try Remove Red-Eye once
again.
e
Press OK and enter the number of
copies you want using the dial pad.
f
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
®
Center print settings on page 50.)
 If you do not want to change any
settings, press Color Start to print.
Monochrome
You can convert your photo to black & white.
a
Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press (PHOTO CAPTURE).
b
Press a or b to choose
Enhance Photos.
Press OK.
®
: Printing photos from a memory card or USB Flash memory drive
c
d
e
f
Sepia
You can convert the color of your photo to
sepia.
a
b
c
d
8
e
f
Press d or c to choose your photo or
picture.
Press OK.
Press a or b to choose Monochrome.
Press OK.
Press OK and enter the number of
copies you want using the dial pad.
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
®
Center print settings on page 50.)
 If you do not want to change any
settings, press Color Start to print.
Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press (PHOTO CAPTURE).
Press a or b to choose
Enhance Photos.
Press OK.
Press d or c to choose your photo or
picture.
Press OK.
Press a or b to choose Sepia.
Press OK.
Press OK. Then enter the number of
copies you want using the dial pad.
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
®
Center print settings on page 50.)
 If you do not want to change any
settings, press Color Start to print.
8
8
47