Canon Satera LBP-5600SE User Manual page 22

Table of Contents

Advertisement

IMPORTANT
The printable envelope types are shown below:
Envelope DL
110.0 mm x 220.0 mm
Envelope COM10
105.0 mm x 241.0 mm
* You cannot use envelopes at sizes of DL, COM10, Monarch, and C5 that have a flap
on the short edge.
Do not use the following types of envelopes. Using inappropriate envelopes may result in
paper jams that are difficult to clear or may result in damage to the printer.
- Envelopes with fasteners or snaps
- Envelopes with address windows
- Envelopes with adhesive on the surface
- Wrinkled or creased envelopes
- Poorly manufactured envelopes in which the glued parts are uneven
- Irregularly-shaped envelopes
Before loading the envelopes, flatten the stack of envelopes to release any remaining air,
and press the fold lines along the edges tight.
Do not print on the reverse side (glued side) of envelopes.
When loading DL, COM10, C5 or Monarch, load them so that the flap is toward the left of
the printer when viewed from the front.
Envelope Monarch
98.0 mm x 191.0 mm
Envelope C5
162.0 mm x 229.0 mm
Envelope B5
176.0 mm x 250.0 mm
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satera lbp-5900se

Table of Contents