Technical Specifications; Installation; Positioning - Electrolux U20011 ER 6624 Instruction Booklet

Electrolux refrigerator instruction manual
Table of Contents

Advertisement

Technical specifications

DIMENSIONS
POWER SUPPLY VOLTAGE AND FREQUENCY
TOTAL POWER ABSORBED
AVERAGE DAILY UNITS ELECTRICITY
GROSS CAPACITY
STAR RATING

Installation

Positioning

For this appliance to work efficiently, it should be
located away from heat sources, e.g. cookers,
radiators, boilers, direct sunlight etc. This also
includes locations or rooms where the ambient
temperature reaches above 32 degrees C or drops
below 10 degrees (e.g. conservatories).
You should also ensure that air can circulate freely
around the back and the top of the cabinet. There
must also be at least 50 mm distance beween the
top of the cabinet and any overhanging kitchen
furniture.
There should also be a gap of 25 mm either side and
at the top of the appliance. Do not obstruct the space
underneath. The back of the cabinet may be placed
close to the wall but must not touch it. DO NOT
install in places with restricted ventilation.
Adjust the level of the appliance by screwing out the
adjustable foot, or feet, at the bottom of the cabinet
using your fingers or a spanner.
Height
Width
Depth
220-240 V / 50 Hz
110 W
0,90 kWh
160 l
Fridge
126 l
D200
15
85
cm
54,5
cm
60
cm

Advertisement

Table of Contents
loading

This manual is also suitable for:

Er 6624 t

Table of Contents

Save PDF